Product Information
Specifications and product information for model evaluation.
Product detail
LED LightWide measurement range, High resolutionSM or MM applications2.5mm universal connector850/1300/1310/1490/1550/1625nmAuto power off (can be cancelled)One-year warranty and three-year recommended calibration interval.



SAT-4EX
LED LightWide measurement range, High resolutionSM or MM applications2.5mm universal connector850/1300/1310/1490/1550/1625nmAuto power off (can be cancelled)One-year warranty and three-year recommended calibration interval.
Contact Aitelong →LED Light
Wide measurement range, High resolution
SM or MM applications
2.5mm universal connector
850/1300/1310/1490/1550/1625nm
Auto power off (can be cancelled)
One-year warranty and three-year recommended calibration interval.
Model | SAT-4EXT | SAT-4EXC |
Display Range | 1310/1490/1550/1625:-70--+10 dBm 850/1300: -60--+6 dBm | 1310/1490/1550/1625:-50--+26 dBm |
Accuracy | ± 0.2dB | |
Calibrated Wavelengths | 850nm/1300nm/1310nm/1490nm/1550/nm/1625nm | |
Display Resolving Power | 0.01dB | |
Linearity | ± 0.2 dB | |
OPM Connector | 2.5mm universal | |
VFL Connector | 2.5mm universal | |
VFL Output(Optional) | 1mW or 10mW, CW and Glint | |
LED Light | SOS code output | |
Automatic Power Off | No operation in 10 minutes (can be cancelled), Low battery energy. | |
Battery Charge | Yes | |
Battery Life | Above 60 hours(OPM) | |
Size | 105mm X 52mm X24mm | |
Weight | About 100g | |
Storage Temperature | -20---+60 ℃ | |
Operating Temperature | -10---+50 ℃ | |
Humidity | <90%RH | |
Elevation | 0---5000m | |
4EXT=OPM(-70---+10 dBm)+VFL(NA/1mw/10nw)/No VFL
4EXC=OPM(-50---+26 dBm)+VFL(NA/1mw/10mw)/No VFL
AITELONG Support
Support for product selection, documentation and field use.
Specifications and product information for model evaluation.
Configuration guidance based on your network, battery system or test objective.
Responsive communication for operation, documentation and after-sales requirements.
Related products
SAT-4E optical power meter is an indispensable tool to identify fiber, measure fiber loss, verify continuity, and evaluate transmission performance, widely used in LAN, WAN, CATV, remote optical network, etc. Key features 1). Wide dynamic range, u...
View Product
SAT-7E PON power meteris a special tester to test FTTx/PON passive optical network, it can synchronously measure voice, data and video signal on BPON/EPON/GPON framework. It also can set the power threshold and indicate the pass, alarm and fail of every w...
View Product
CWDM optical power meter is a full-featured palm-sized CWDM optical network channel detector, which is mainly used to measure and monitor the power of up to 6 or 18 CWDM channels. The test power value can be displayed in bar graph or list mode. It is spec...
View Product
SAT-7F PON power meter integrates FTTx/PON power meter, VFL, RJ45 sequence, cable length, and RJ45 tracker.Featuresl 3.5 inch TFT screenl 1310/1490/1550nm in PON system can be tested.l Support function VFL/ RJ45 seq...
View ProductNo products found in this category.