Product Information
Specifications and product information for model evaluation.
Product detail
SAT-3C01 Optical Visual Fault Locator
SAT-3C01 Optical Visual Fault Locator is used for optical identification,fault locating of SM fiber or MM fiber,which is a basic maintenance tool of optical network, LAN, FDDI, ATM optical system, and telecom network system,suitable for field working.Key Features: 1). Identifying fiber breaks, bend, splices, and other loss fault 2). Large power up to 650nm red laser 3).Transmitting continuous light or 1Hz modulated light 4). Pen-shaped design, small size, light weight, easy to use 5). Powered by standard AA alkaline batteries 6). 2.5nm universal connectors
SAT-3C01
SAT-3C01 Optical Visual Fault Locator
SAT-3C01 Optical Visual Fault Locator is used for optical identification,fault locating of SM fiber or MM fiber,which is a basic maintenance tool of optical network, LAN, FDDI, ATM optical system, and telecom network system,suitable for field working.Key Features:
1). Identifying fiber breaks, bend, splices, and other loss fault
2). Large power up to 650nm red laser
3).Transmitting continuous light or 1Hz modulated light
4). Pen-shaped design, small size, light weight, easy to use
5). Powered by standard AA alkaline batteries
6). 2.5nm universal connectors
SAT-3C01 Optical Visual Fault Locator is used for optical identification,fault locating of SM fiber or MM fiber,which is a basic maintenance tool of optical network, LAN, FDDI, ATM optical system, and telecom network system,suitable for field working.
Key Features:
1). Identifying fiber breaks, bend, splices, and other loss fault
2). Large power up to 650nm red laser
3).Transmitting continuous light or 1Hz modulated light
4). Pen-shaped design, small size, light weight, easy to use
5). Powered by standard AA alkaline batteries
6). 2.5nm universal connectors
Model | SAT-3C01 | ||||
Working Wavelength | 650nm ±20nm | ||||
Emitter Type | LD | ||||
Output Power | Optional: 2mW,10mW,20mW, 30mW | ||||
Spectrum Width | ≤5 nm | ||||
Working Mode | Continuous light and 1Hz modulated light (CW and Pulsed) | ||||
Distance | Optional:≥5km, ≥15km, ≥20km, ≥30km | ||||
Optical Fiber Type | Single mode fiber (SM) or multimode fiber (MM) | ||||
Adapter type | 2.5 mm connector (FC/SC/ST) | ||||
Power supply | 2x1.5V AA alkaline batteries | ||||
Working time | 80 hours/50 hours (modulated light/continuous light) | ||||
Operating Temperature | -10~+50℃ | ||||
Storage Temperature | -20~+70℃ | ||||
Humidity | 0~95% (non-condensing) | ||||
Dimension | Length:170mm, Diameter: 24mm | ||||
Weight | 160g | ||||
It is only for reference. The actual accessories and quantity are according to demand.
No. | Item | Qty. |
1 | SAT-3C04 Optical Visual Fault Locator | 1 set |
2 | User Manual | 1 copy |
3 | Qualified certificate of products/Warranty card | 1 pc |
4 | Packing list | 1 pc |
5 | Soft bag | 1 pc |
AITELONG Support
Product & Project Support
Support for product selection, documentation and field use.
Application Selection
Configuration guidance based on your network, battery system or test objective.
Technical Support
Responsive communication for operation, documentation and after-sales requirements.
Related products
You May Also Like
SAT-6C03 Optical Fiber Identifiuer
SAT-6C03 can detect optical signal presence/type and direction anywhere on fibers during optical network deployment, maintenance and troubleshooting. With non-destructive macro-bend detection technology, it introduces no damage to tested fiber or interfer...
View Product
SAT-3C02 Rechargeable Visual Fault Locator
1). Equip with 4 LED light2). 2.5mm universal connector3). Can powered by power bank4). Anti-misoperation5). 1800mAh battery6). Aluminium alloy bodySpecificationModelSAT-3c02Wavelength650nm±20nm
View ProductNo products found in this category.